A split level design house is a home whose floors are staggered by roughly half a storey, so instead of one long staircase you get several short ones that link an entry level, a raised level and a lowered level. It is a distinct American layout with clear types, real trade-offs and a floor plan logic that is surprisingly useful if you build 3D game levels. This guide covers the architecture first, then shows how to model one in code and with an AI game engine.
What is a split-level house?
In a conventional two-storey home, one floor sits directly on top of the other and a full staircase connects them. A split-level breaks that stack apart. The floors are offset vertically by about half a storey, and each level is reached by a short run of six to eight steps, usually called a half-flight.
The style became popular in postwar suburbs. Wikipedia’s list of house types describes the split-level as a design commonly built during the 1950s and 1960s. Builders liked it because it fit sloping suburban lots without heavy excavation, and buyers liked that it separated noisy family spaces from quiet bedrooms without a full second storey.
The typical program looks like this:
- Main level (entry level): front door, living room, dining area and kitchen, roughly at ground height.
- Upper level: bedrooms and bathrooms, half a storey above the main level.
- Lower level: a family room, den, laundry or garage, half a storey below the main level, often opening onto the yard.
- Optional basement: some plans add a fourth level below the lower level for storage or utilities.
The upper and lower levels are usually stacked on top of each other, while the main level sits beside them. That stacking is the key to understanding every split-level floor plan.
Types of split-level houses
Architects and real estate listings group split-levels into a handful of types. The differences come down to which direction the split faces and how many levels there are.
| Type | What you see from the street | How the levels work | Best fit |
|---|---|---|---|
| Standard split | A one-storey wing beside a two-storey wing | Enter at the main level; half up to bedrooms, half down to family room | Lots that slope side to side or gently front to back |
| Side split | The split runs across the façade, visible from the front | Same three levels, arranged left to right as you face the house | Wide lots with a sideways slope |
| Back split | Looks like a single-storey ranch from the front | The extra levels step down toward the rear yard | Lots that fall away behind the house |
| Split entry (raised ranch) | Front door between two floors | A small landing inside the door; half up to living, half down to a finished lower floor | Flat or slightly sloped lots, budget builds |
| Tri-level | Three distinct floor heights | The classic three-level arrangement, sometimes with a basement | The most common general-purpose form |
A tri-level house design is really the textbook split-level, and many people use the two terms interchangeably. The split entry is the odd one out: it has only two main floors, but because you land between them, it still behaves like a split.
Compare this with a single level house design, often a ranch, where every room sits on one floor. Single level homes are easier to age in and simpler to heat, but they need a wider, flatter footprint. Split-levels trade some accessibility for a smaller footprint and better use of a slope.

How a split level design house is laid out
Most split-level house floor plans follow the same logic, whether the home is a compact 1960s builder model or a modern architect-designed version on a hillside.
The entry decides everything
The front door almost always opens onto the main level or onto a landing between levels. From there, guests can reach the living and kitchen areas without climbing, while family members head up or down to private spaces. That makes the entry the hub of the whole plan.
Stacked wings and a side wing
Picture two blocks. One is a single tall block containing the upper and lower levels stacked together. The other is a shorter block, the main level, sitting beside it at a height halfway between them. The half-flights of stairs sit where the two blocks meet, usually in the same stairwell, one going up and one going down.
Zoning by noise
The layout naturally separates activity zones. Bedrooms are a half-flight away from the kitchen, and the family room or garage is a half-flight below, so a TV or a workshop does not carry straight into the sleeping area. This zoning is one of the main reasons the style spread so quickly.
The exterior tells you the plan
A split level house exterior usually shows a low roofline over the main wing and a taller roofline over the stacked wing, often with the garage tucked into the lower level. Many older examples mix brick on the lower half with siding above, and have a shallow-pitched roof. Reading the exterior is a fast way to guess the interior: the taller wing is where the stairs and bedrooms are.
Pros, cons and remodel ideas
A split-level is neither better nor worse than other layouts. It solves particular problems and creates others.
Strengths
- Works with a slope: the lower level can open at grade on the downhill side, giving it daylight and a real door.
- Clear zoning: public, private and recreational spaces are separated without long hallways.
- Short climbs: no single staircase is long, which some people find easier day to day than a full flight.
Weaknesses
- Stairs everywhere: almost every trip between zones involves steps, which is a real issue for wheelchairs, strollers and older residents.
- Closed-off rooms: many older split-levels have small, walled-in kitchens and a dark stairwell.
- Uneven heating and cooling: warm air rises to the upper level while the lower level stays cooler.
Common remodel moves
Most split-level remodels aim to open the main level and brighten the stairwell. Typical projects include removing or shortening the wall between the kitchen and living room, swapping solid stair walls for open railings, adding larger windows on the lower level, and refreshing the exterior with a single cladding material and a new entry canopy.
The big caution: walls around the stairwell and between the stacked and main wings are often load-bearing. Before you remove anything, have a structural engineer check it. Kitchens, bathrooms and structural work tend to be the costliest parts of any remodel, so get local quotes rather than relying on national averages.





